Siliconized glass cover slides allow a droplet to be suspended in a position which provides near optimal conditions for vapor diffusion with the surrounding reservoir solution.
These siliconized glass cover slides provide a consistent, high quality finish for crystallization experiments. The hydrophobic surface produces a drop which “stands well” and does not flatten on the glass. The siliconized surface prevents the adhesion of crystals and precipitate onto the glass surface. Use Dow Corning Vacuum Grease (HR3-510) or Dow Corning 7 Release Compound (HR3-508) to seal cover slide to plate. Available in 12, 18 or 22 mm diameter circles and 22 mm diameter squares. Available in 0.22 mm or 0.96 mm glass thickness. The 0.96 mm thick slides are virtually unbreakable during crystallization handling.
Critical surface tension Untreated glass 78 dynes/cm Siliconized glass 31 dynes/cm Surface resistivity Untreated glass 1x1012 ohms Siliconized glass 1.2 x 1013 ohms Coefficient of friction static, glass slide on glass slide Untreated 0.9-1.0 Siliconized 0.2-0.3 Protein adsorption (100 hours) Untreated glass 0.13 mg/mm2 Siliconized glass 0.01-0.02 mg/mm2
The following slides are UV transmissible (>85%):
HR3-277 and HR3-279 - 12 mm x 0.22 mm Siliconized circle cover slides
HR3-231 and HR3-233 - 22 mm x 0.22 mm Siliconized circle cover slides
HR3-239 and HR3-241 - 18 mm x 0.22 mm Siliconized circle cover slides
HR3-215 and HR3-217 - 22 mm x 0.22 mm Siliconized square cover slides
1.0 ounce pack (~120 slides)
10.0 ounce case (~1,200 slides)
3 ounce pack (~75 slides)
30.0 ounce case (~750 slides)
1.0 ounce pack (~100 slides)
10.0 ounce case (~1,000 slides)
4.0 ounce pack (~75 slides)
40.0 ounce case (~750 slides)