Home | Products | Quick Order | Customer Service | Tech Support | Contact Us
Home  |   Tech Support | Crystallization Tips | Cryo | Cleaning a CryoLoop
Crystallization Tips  
Cleaning a CryoLoop
Soak the CryoLoop in a 0.5-2.0% detergent solution for 15 minutes or more. To improve the action of the cleaning solution, try increasing the temperature of the solution. The use of ultrasonic or other agitation will further improve the cleaning action. Finally, lengthen the dwell time or increase the concentration of the solution.

Wicks can be used for delicate scrubbing of the CryoLoop. Dip the end of the wick into a detergent solution or 2-Propanol, and gently clean the nylon CryoLoop.

Compressed air can be used to remove debris from a CryoLoop. Hold the tip of the air sprayer from than 3 inches from the CryoLoop and use gentle pressure (less than 25 psi).

HR4-211 Paper Wicks - 55 mm X Fine Long - 100 wicks

HR4-213 Paper Wicks - 55 mm Medium Long - 100 wicks

Micro-90, International Products Corporation www.ipcol.com (609) 386-8770

HR4-411 Duster - Canned Air 10 oz can each
TECHNICAL SUPPORT
Tel: 949-425-1321
Fax: 949-425-1611
Email: tech@hrmail.com
LOCATION
Hampton Research
34 Journey
Aliso Viejo, CA 92656-3317
Toll Free: 800-452-3899
Tel: 949-425-1321
Fax: 949-425-1611
BUSINESS HOURS
7:00 am to 5:00pm
Monday - Friday
(Pacific Standard Time)
info@hrmail.com   |  800.452.3899   |  949.425.1321   |  Fax 949.425.1611   |   ©COPYRIGHT 2003 - 2010 HAMPTON RESEARCH CORP. ALL RIGHTS RESERVED.   |  PRIVACY POLICY